Glass greenhouse - greenhouse construction

Glass greenhouse is glass transparent covering material greenhouse.

 

Design requirements

 

The basic design, in addition to meet the strength requirements, should also have a sufficient stability and resistance to uneven subsidence of the foundation connected to the column between the support should also have sufficient transfer horizontal force effect and dimensional stability. The greenhouse should be located at the bottom of the permafrost below, the heating greenhouse heating according to the climate and soil conditions to consider the impact on the basis of cold deep. The bottom of the general foundation should be lower than outdoor ground 0.5 meters above the foundation top surface of the ground outside the distance should be greater than 0.1 m, in order to prevent the foundation exposed and the adverse effects of cultivation. In addition to the special requirements of the top surface and interior of the greenhouse foundation ground distance should be greater than 0.4 m.

Independent foundation. Usually the use of reinforced concrete.

Strip foundation. Usually masonry structure (brick, stone), construction scene masonry, the foundation often set at the top of a reinforced concrete ring beam to install embedded parts and increase the basis of strength.

Steel structure include: support set by the the greenhouse load-bearing structure and to ensure structural stability, fittings, fasteners.

Pagekeywords:plastic greenhouses,portable greenhouse,plastic greenhouse